A super versatile board, it has become one of JJF's favorites for all kinds of surf (Margaret River winner, Bells Ollie Oop, J-Bay carves, and even head-high Trestles) and a go-to for many surfers around the world. Originally designed for performance in hollower, more powerful types of waves, the Ghost has proven to be great for reef breaks, dumpy beachies, and also excels in point waves.
Based off of the Pyzel Short Cut, The Ghost outline is more refined: it still has the wide point pushed a bit forward of center, but the nose area is kept down and the tail slightly pulled in to help it fit into a tighter curve. The thickness is also pushed forward, which helps even more with getting you into waves easily, and Pyzel kept the tail and rails thinned out to help hold through barrels and turns at speed. The rocker is med/low through the front half to get you into waves easily and pick up speed quickly. The rear end has plenty of rocker curve for turning control and a snappy responsiveness. Single concave runs through the entire bottom, with a double concave set inside, which equals speed and lift both on a rail and over flat spots while allowing for quick rail-to-rail transitions. The Ghost's combination of rocker and concave makes for high performance handling through a healthy mix of sensitivity and control.
The design that JJF rode to two consecutive World Titles! The Ghost is possibly the first truly High Performance board that works great for all levels of surfer and could be considered a one-board quiver for any surf trip with decent to good waves on the menu.
Depending on what you want to ride it in Pyzel recommends you order your Ghosts anywhere from your height to 8" over, a 1/4" to 1/2" wider, and 1/8" to 3/8" thicker than your everyday shorty.
ⓘ SURFBOARD DAMAGE
This board has visible cosmetic scuffs and some very minor damage along the edge of the tail. See photos for further detail.
Product Info
A super versatile board, it has become one of JJF's favorites for all kinds of surf (Margaret River winner, Bells Ollie Oop, J-Bay carves, and even head-high Trestles) and a go-to for many surfers around the world. Originally designed for performance in hollower, more powerful types of waves, the Ghost has proven to be great for reef breaks, dumpy beachies, and also excels in point waves.
Based off of the Pyzel Short Cut, The Ghost outline is more refined: it still has the wide point pushed a bit forward of center, but the nose area is kept down and the tail slightly pulled in to help it fit into a tighter curve. The thickness is also pushed forward, which helps even more with getting you into waves easily, and Pyzel kept the tail and rails thinned out to help hold through barrels and turns at speed. The rocker is med/low through the front half to get you into waves easily and pick up speed quickly. The rear end has plenty of rocker curve for turning control and a snappy responsiveness. Single concave runs through the entire bottom, with a double concave set inside, which equals speed and lift both on a rail and over flat spots while allowing for quick rail-to-rail transitions. The Ghost's combination of rocker and concave makes for high performance handling through a healthy mix of sensitivity and control.
The design that JJF rode to two consecutive World Titles! The Ghost is possibly the first truly High Performance board that works great for all levels of surfer and could be considered a one-board quiver for any surf trip with decent to good waves on the menu.
Depending on what you want to ride it in Pyzel recommends you order your Ghosts anywhere from your height to 8" over, a 1/4" to 1/2" wider, and 1/8" to 3/8" thicker than your everyday shorty.
ⓘ SURFBOARD DAMAGE
This board has visible cosmetic scuffs and some very minor damage along the edge of the tail. See photos for further detail.
Product Details
- Type: Shortboard
- Dimensions: 6'6" x 20 ½" x 3"
- Construction: PU/PE
- Volume: 40.1L
- Tail: Rounded
- Fin Configuration: Tri-Quad
- Fin Plug: Futures Fins compatible fin boxes
*Fins Not Included
Product Construction
Polyurethane/Polyester Resin (PU/PE)
A board built in PU/PE means that Pyzel uses a Polyurethane foam blank and they glass it with Polyester resin. This is how the majority of today’s surfboards are built. It is how Pyzel has been making boards for years, and these materials let them make a very stable, strong, consistent, and high-performance board that has the feel that most people are used to.
PU foam is closed celled, meaning it won’t easily soak in water if you ding your board, and that also means that it doesn’t absorb too much resin when getting glassed, keeping your board light. Many surfers prefer the feel of PU/PE boards because that is what they have ridden all their lives, and because they feel really good.
At Pyzel Surfboards, they use only the best foam blanks, highest quality fiberglass and resin, and hire the best craftsmen in the industry. The result is light, tight and bright high performance, reasonable priced boards that look beautiful and work great. Below are the glassing options they offer for PU boards.
Additional Info
Shipping Surfboards
Call us at 888-546-6176 or 503-738-7888 to learn more about our Surfboard shapes, our opinions on how they ride, or if you need any additional shipping information you can use our contact page.
US Shipping Rates for New & Used Surfboards
| Location | 5'9 and under | 5'10 to 6'10 | 6'11 to 8'0 | ~8'0 and up |
| Lower 48 States | $125 | $210 | $235 | Contact Us |
| Hawaii & Alaska | Contact Us | Contact Us | Contact Us | Contact Us |
Read more about our Shipping Policy.
Returns
Due to the high cost of stocking and shipping surfboards, we do not cover return shipping costs, and any returned surfboard shipped from Cleanline is subject to a $50 restocking fee. See our full return policy by clicking the button below.
What Our Customers Are Saying